Information

Cat 988 loader specs

Cat 988 loader specs


We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Cat 988 loader specs

Hi folks, first post here...I have a question about what I think is a really common question in our area - is the Cat 988 loader too big to fit in our shop? We have a small shop with a single track that we'll be pulling with it. It's got a really long arm that extends over the track a bit, and the cab and engine are attached to it.

I've got a friend who's looking to get into this, but has a pretty good idea that this would be too big for our space. I'm trying to get a sense of how big of a loader this is, and what we'd be looking for in a new one. It's not the most powerful, and not the biggest in capacity, but it's got a long reach. I'd be curious to get a sense of what we're looking at here. Thanks!

I'm not sure what you mean by 'long reach' but with a 900 model the cab and engine are attached to the arm by way of a set of hydraulic cylinders. This gives you the ability to rse and lower the arm to position it where you want, and it is frly powerful.

The other feature that would help you, if it's something you're looking for, is the capability to tilt the arm forward and backward. You could rse the loader until it's level and have it go in the direction you want. If the arm is also tilted you could lower it to the ground to load a heavy piece, and you could rse it agn to take it off the loader.

A couple things to consider - the loaders are relatively new models and you may want to get a used one - as new models are produced they become less heavy and more flexible, but they have a finite life, and it's best to not buy a new one if you can help it. Also, the cat loader is a pretty popular brand, but it's hard to get parts for the loader - so a used model could be very useful to you.

I have a 988 (900). It's a great loader and I would recommend it. I would also agree with another member that the 900 series is the most flexible of the 988 series and I think you can get by with the 988.

I wouldn't go with a "long reach" model. For my use, it is just right.

If you decide to go with a 900, the front forks will be adjustable with a hydraulic jacking system, allowing you to adjust your load, and then have the hydraulic system lower the arm for transport.

If you're looking for a "big" loader, then the Cat 955, 975, and 995 models are the largest models. If you're looking for a "little" loader, then the 890 and 910 models are small.

I'd love to be able to rse and lower a loader like a bulldozer or backhoe, but I just don't have the space for that type of operation. I think it's an awesome model, but just a bit too big for our space.

The only one I don't like about the 900 is that they are so heavy. I'd like to get one with as little weight as possible. But I don't know what they are like in the used market. It seems like there are quite a few out there, but I haven't been able to find anything yet.

The 990 is the largest that can be had for a new model and the 990 is more of a workhorse model as opposed to a loader. I think the 988 is great for what we have but we have a very nice small shop (about 8x10) and a very light shop (1,500#). I think we are going to get a 988, but we will have to see what is avlable.

I'd be hesitant to recommend a 988. The 900 is a much better option for your shop, but you will have to pay more for the 988. The 988 model has the long reach, but you will have to buy the longer arm that is needed for this.

The other options are the Cat 995 (or similar model), or the Cat 975 which is the same length as the Cat 988. These two models will give you the same arm length as the 988, but will have the shorter wheelbase.

The short wheelbase will give you the flexibility to turn the arm as far as you want to and will be easier for transport.

If you don't have the ability to tilt the arm, you will also want the 880 or 890.

The Cat 880 and 890 are a little cheaper than the 995, but they are smaller models. The 880 and 890 will have a shorter wheelbase which will make for a shorter, lighter model. They will not be able to reach as far as the 995.

If you need to keep a longer wheelbase, then the 965 (or similar model) is a nice option. This model is basically the Cat 975 with the longer wheelbase. If you do buy the 975, then make sure to get the model that has the tilt feature. The model without the tilt feature will require you to make customizations to your shop.

The only one I don't like about the 900 is that they are so heavy. I'd like to get one with as little weight as possible. But I don't know what they are like in the used market. It seems like there are quite a few out there, but I haven't been able to find anything yet.

The 990 is the largest that can be had for a new model and the 990 is more of a workhorse model as opposed to a loader. I think the 988 is great for what we have but we have a very nice small shop (about 8x10) and a very light shop (1,500#). I think we are going to get a 988, but we will have to see what is avlable.

I'd be hesitant to recommend a 988. The 900 is a much


Watch the video: Cat 988 Wheel Loader 50 Years (May 2022).

Video, Sitemap-Video, Sitemap-Videos